Skip navigation
Syntran® 6150
Syntran 6150 is a High Density Polyethylene Emulsion for Floor Finishes and Industrial Coatings.  This polymer contains a significant degree of crystallinity, which helps to impart mar resistance to coatings as well as black heel mark resistance and buffability to industrial floor polishes.  Syntran 6150 is also recommended for use in water based paper coatings, vinyl and wood coatings, or resilient tile factory finishes where anti-blocking and hardness are required. *

 





Syntran 6150 uses a unique anionic/nonionic emulsification system which produces a high solids emulsion with fine particle size, low viscosity and excellent stability characteristics.  This allows the formulator to develop high solids coatings and finishes with excellent gloss and stability without detracting from water resistance properties.

 

Typical Physical Properties

  • POLYMER TYPE:    High Density Oxidized Polyethylene Emulsion
  • TOTAL SOLIDS:    40%
  • pH @ 22° C:    9.4
  • SPECIFIC GRAVITY @ 22° C:    0.991 
  • VISCOSITY @ 22° C:    300 cps (Brookfield)
  • EMULSIFIER TYPE:    Anionic – Nonionic
  • HEAT STABILITY @ 52° C:    Unchanged after 30 days
  • FREEZE-THAW STABILITY:    Protect from freezing

*Available only in North America