Skip navigation
SyntranŽ 6120
Syntran 6120 offers formulators the ability to produce low VOC content wood finishes with improved gloss and film clarity.  Coatings formulated using Syntran 6120  can be applied using conventional techniques of spraying, dipping, flow and roller coating.  The product is supplied as high solids, fine particle size emulsion with very low surfactant content.  Syntran 6120 formulations can be made at up to 38% solids for maximum gloss build.

 






Syntran 6130  is a water based acrylic copolymer for coatings to be applied to furniture, wood trim and wood floors.  In combination with water based urethane polymers,  Syntran 6130 offers the formulation significant advantages compared to water based or solvent based urethane systems.

 

Syntran 6120 has a minimum film formation temperature of 80°C and improves film hardness as well as mar and scuff resistance.

 

Performance Benefits

  • Rapid drying times
  • Reduced costs
  • Superior film clarity
  • Excellent mar resistance

Features

  • Low solvent demand
  • Formulating flexibility
  • Improved flow and leveling

Typical Physical Properties

  • POLYMER TYPE:    Acrylic Copolymer Emulsion
  • TOTAL SOLIDS:    45%
  • pH @ 22°C:   7.5 
  • SPECIFIC GRAVITY @ 22°C:    1.072
  • VISCOSITY @ 22°C:    500 cps (Brookfield)
  • MINIMUM FILM FORMATION TEMPERATURE:     80°C
  • CHARGE OF EMULSION PARTICLE:    Negative
  • HEAT STABILITY @ 52°C:    Unchanged after 30 days
  • FREEZE-THAW STABILITY:    Unchanged after 3 cycles